Cm2250 Rear Seal
11-22-2021, (Subject: Cm2250 Rear Seal ) 
Post: #1
Cm2250 Rear Seal
I ordered a new rear seal and it came with a plastic spacer? ring ( see pic). I am a little confused what this is for, Does this allow me to install the seal with a soft hammer instead of the special tool?


Attached File(s)Thumbnail(s)
   
replyreply
11-22-2021, (Subject: Cm2250 Rear Seal ) 
Post: #2
RE: Cm2250 Rear Seal
register the engine ser# on quickserv.com.. and follow the instructions for replacing the seal.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: RollinCoal
11-23-2021, (Subject: Cm2250 Rear Seal ) 
Post: #3
RE: Cm2250 Rear Seal
The plastic spacer fits inside the seal installer and meets the flywheel housing to set the depth of the seal. Sure you could use it as-is with a hammer, but for the work involved in redoing it.... I would consider paying a mechanic, friend or dealer to come out with the right tools and install it correctly.
replyreply
 Thanks given by: Rawze
11-25-2021, (Subject: Cm2250 Rear Seal ) 
Post: #4
RE: Cm2250 Rear Seal
Amazon also has the tool needed. I've used mine twice. It works fantastic.

3164780 Crankshaft Rear Main Seal & Wear Sleeve Installer & Seal Remover Tool for Cummins ISX QSX ISX15 ISX12 https://amzn.to/3d4wNA9
replyreply
 Thanks given by: schISM , quickrigs




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication