Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / CAT, Detroit, and Other engine related Help... / N14 Celect Plus Timing Specs CPL 2592 525 HP

new reply
N14 Celect Plus Timing Specs CPL 2592 525 HP
01-05-2022, (Subject: N14 Celect Plus Timing Specs CPL 2592 525 HP ) 
Post: #4
Rawze Offline
Forum Reject  (13903 Likes)  *******

 		Posts: 10,996
Joined: Jun 2013
Thanks: 5883
Given 13903 thank(s) in 6071 post(s)
RE: N14 Celect Plus Timing Specs CPL 2592 525 HP
(01-05-2022 )Luckyjayb Wrote:  
(01-05-2022 )Rawze Wrote:  is it not on quickserv in the assembly procedures?

Per quickserve is says to reference the data plate. Ive attached the file from quickserve

the procedure that you partially mentioned above also includes instructions for using a static timing tool and a chart to go for the timing code so that you know what the correct measurements are.

(what I found on quickserv about it any ways)...

here is that full procedure...
https://quickserve.cummins.com/qs3/pubsy...6-025.html

and here is the chart...
https://quickserve.cummins.com/qs3/pubsy...ing%20code


.pdf  Cummins static timing codes chart(older engines including N14).pdf (Size: 113.43 KB / Downloads: 127)

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: Luckyjayb
new reply


Messages In This Thread
RE: N14 Celect Plus Timing Specs CPL 2592 525 HP - Rawze - 01-05-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication