CM871 broken Turbo Clamp on boost side

[tariqzai]

(05-05-2022 )tariqzai Wrote:  

(05-04-2022 )Nostalgic Wrote:  Replace the clamp, check your shaft for play and make sure it didn't chew into the housing. Remove the outlet horn (to the cac) before you start it and make sure it's not pushing out oil. (with no back pressure, some oil may be present).

Thanks, I will do that.

i checked the turbo fan and it had some play, enough to hit the housing when i pushed it up with my finger, brought truck home and going to replace turbo. thanks for help.