Wetness on two blades of turbo exhaust side

[Rawze]

Could be condensation, could be valve guide seepage, could be a bit of anything. Likely should not be of concern unless the engine is acting up in some way.

700k on the turbo, if the actuator has not been rebuilt in that many miles, maybe tear it down and freshen it up like described in my turbo actuator rebuild video series ...





#2: https://www.youtube.com/watch?v=K_ejh9uY-4E&t=0s
#3: https://www.youtube.com/watch?v=oIIQ2n62WWI&t=0s
#4: https://www.youtube.com/watch?v=b6HamulGnnI&t=0s
#5: https://www.youtube.com/watch?v=gMkv3hvwIZA&t=0s
#6: https://www.youtube.com/watch?v=nfRNTXPkRec&t=0s
#7: https://www.youtube.com/watch?v=fTk9TNA3fMI&t=0s
#8: https://www.youtube.com/watch?v=qhmF-YXeVAA&t=0s