Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Main, rod bearing and oil pump

new reply
Main, rod bearing and oil pump
09-06-2016, (Subject: Main, rod bearing and oil pump ) 
Post: #11
Rawze Offline
Forum Reject  (13942 Likes)  *******

 		Posts: 11,047
Joined: Jun 2013
Thanks: 5905
Given 13942 thank(s) in 6093 post(s)
RE: Main, rod bearing and oil pump
(09-06-2016 )Unilevers Wrote:  i would be REPLACING the oil pump, SHIMMING the new pump, PLASTIGAUGING all the rods/main, replacing the bypass valve aswell.

I second that, and as well, be looking at the top end to see if there is excess wear in the bearings for the rockers,..and make sure you don't have a spun bearing in one of the overhead cams while you are at it.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Main, rod bearing and oil pump - Unilevers - 09-06-2016,
RE: Main, rod bearing and oil pump - Rawze - 09-06-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication