Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Main, rod bearing and oil pump

new reply
Main, rod bearing and oil pump
09-07-2016, (Subject: Main, rod bearing and oil pump ) 
Post: #15
Sergiu Offline
HMR-Contrinbuting V.I.P.  (37 Likes)  *****

 		Posts: 80
Joined: Feb 2016
Thanks: 190
Given 37 thank(s) in 17 post(s)
RE: Main, rod bearing and oil pump
Has anyone experience with the shimmed oil pump in the winter time ? What would be the pressure readings at cold start below freezing temp ? In summer time, my gauge shows 41 psi till the temperature hits 100-120F and that's a stock oil pump. What do you think?
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Main, rod bearing and oil pump - Unilevers - 09-06-2016,
RE: Main, rod bearing and oil pump - Sergiu - 09-07-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication