Rawze.com: Rawze's ISX Technical Discussion and more

Is there a video for leakdown test on cm2350? I can only find the ones for 871. Thanks

here ya go...

(11-05-2020 )Rawze Wrote: [ -> ]here ya go...

Thanks, Is there a way to determine which injector is leaking? Replaced fuel rail relief valve, new fuel pump about 8 months ago, the problem started first trip out after rebuild, gives low fuel rail psi code only when pulling a hill, so im guessing its an injector or injector connecting tube, which were not replaced in the rebuild process...

Go to quickserve.com and register your esn# then you can access all this information for free.

(11-06-2020 )tree98 Wrote: [ -> ]Go to quickserve.com and register your esn# then you can access all this information for free.

I've done that, but couldnt find anything about isolating bad injector, i must have missed it, i"ll read over it again.

This should help

http://rawze.com/forums/showthread.php?tid=6707