+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Any way to know?? (/showthread.php?tid=2285)
Pages: 1 2
RE: Any way to know?? - Unilevers - 10-22-2017
the stems seals are easily seen without removing anything but the rocker cover. get a flashlight and see if they are still old style and stuck on the guides or ridden up near the valve stem retainer.
15 min to verify.
RE: Any way to know?? - JMBT - 10-22-2017
Excellent info, thanks Unilevers! What identifies them as the old style?
RE: Any way to know?? - Hammerhead - 10-24-2017
(10-22-2017 )JMBT Wrote: Excellent info, thanks Unilevers! What identifies them as the old style?
The "old style" are atypical v/g seals that attach/retained to the top of the valve guide.
The "new style" are a full length "captured" style that fully envelope the valve guide and are retained by the spring against the bottom of the spring seat pocket in the head.
RE: Any way to know?? - JMBT - 10-24-2017
Thanks Hammer!