Rawze.com: Rawze's ISX Technical Discussion and more
Isx oil temp - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Isx oil temp (/showthread.php?tid=9108)

Pages: 1 2


RE: Isx oil temp - Rawze - 09-22-2023

(09-22-2023 )Bengy88 Wrote:  The engine was running 12 degrees final timing, the turbo tables were also slap f*cked. I’ll include pictures. There was absolutely no mode control or attempt at it. Whoever tuned it jumped cpl numbers. And the egr wasn’t properly in Bluetooth mode. Should have a report back tomorrow on oil temps after it was repaired but that’s what I seen at a quick glance when I looked at it. I really don’t understand the concept of these turbo tables though….. it looks like some shi#t out of a 16 year olds powerstroke.

They simply were not done... or were edited so that the turbo can run completely unrestricted and totally out of control.

Looks/sounds like a typical bad de-mandate to me. Welcome to the bad delete club.
ref: http://rawze.com/forums/showthread.php?tid=1558&pid=13255#pid13255


RE: Isx oil temp - Isv1 - 09-22-2023

(09-22-2023 )Bengy88 Wrote:  The engine was running 12 degrees final timing, the turbo tables were also slap f*cked. I’ll include pictures. There was absolutely no mode control or attempt at it. Whoever tuned it jumped cpl numbers. And the egr wasn’t properly in Bluetooth mode. Should have a report back tomorrow on oil temps after it was repaired but that’s what I seen at a quick glance when I looked at it. I really don’t understand the concept of these turbo tables though….. it looks like some shi#t out of a 16 year olds powerstroke.
Man did I learn alot with this and I appreciate all the help and knowledge you shared with me again I can't say thank you enough!!!