+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Questions about tappets and barrel valve (/showthread.php?tid=9304)
Questions about tappets and barrel valve - Nhramember - 12-23-2023
Hey everyone I replaced tappets ,pump,barrel etc . I have been getting 559 code which I did post earlier in the posts. I went ahead and pulled the head back off the pump to check the head. This is what I found. The tappets are fine cam in the pump is good. The barrel valve and plungers were like this when I took them off. [attachment=9265]
RE: Questions about tappets and barrel valve - tree98 - 12-23-2023
Yea that's a problem. The pump needs a whole new head, the check valve inside it is bad.
.
RE: Questions about tappets and barrel valve - Nhramember - 12-23-2023
(12-23-2023 )tree98 Wrote: Yea that's a problem. The pump needs a whole new head, the check valve inside it is bad.
.Hey tree do they sell a rebuild kit for the head or do you have to buy a whole new head? Thanks for the input.
RE: Questions about tappets and barrel valve - tree98 - 12-23-2023
Nope, you have to buy the whole head
RE: Questions about tappets and barrel valve - Nhramember - 12-23-2023
(12-23-2023 )tree98 Wrote: Nope, you have to buy the whole headBest place to buy? Cummins or aftermarket rebuild?
RE: Questions about tappets and barrel valve - tree98 - 12-23-2023
Genuine cummins only
RE: Questions about tappets and barrel valve - SquareOne - 12-24-2023
Here is a little insight on what Tree is talking about...check post #23:
https://rawze.com/forums/showthread.php?tid=7266&page=3
I did this a couple years back. You can read the whole thread if you'd like, but post #26 explains the parts list I used....
https://rawze.com/forums/showthread.php?tid=7266&page=3