ISX Noisy gear train...
03-27-2017, (Subject: ISX Noisy gear train... ) 
Post: #1
ISX Noisy gear train...
There is a TSB on quickserv about noisy gear train on some engines. Here is the TSB...
https://quickserve.cummins.com/qs3/pubsy...60042.html

Engines with suspect crankshaft gears were built between May 2015 and January 2016.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: snailexpress , Squish099 , Vin , scottydogtruck , Hedley
03-27-2017, (Subject: ISX Noisy gear train... ) 
Post: #2
RE: ISX Noisy gear train...
Cylinder liners getting lobed and causing excess oil consumption as early as 35k miles of engine life...

https://quickserve.cummins.com/qs3/pubsy...40030.html

Quote:The date code is formatted as Day, Year, and Shift. For example, "138 2 3" would translate to the 138th day of the year, the year 2012, and the third shift of the day. This code would be May 18th, 2012, Third Shift.

Liners with an XPLZ marking that are produced after the date code 271 3 1 are not suspect for lobing.
Liners with an ABDJV marking are not suspect for lobing.



It looks like they changed the material/design of the liners to help prevent this after 9-28-2013, so if your engine was built before then, it likely has liners potentially prone to this.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: snailexpress , Squish099 , Vin , scottydogtruck , Hedley , JMBT
03-27-2017, (Subject: ISX Noisy gear train... ) 
Post: #3
RE: ISX Noisy gear train...
TSB for people who get coolant in their fuel, or fuel into their coolant. Effects 2250 and 2350 engines ..

https://quickserve.cummins.com/qs3/pubsy...70002.html


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: snailexpress , Squish099 , Vin , scottydogtruck , Hedley , JMBT
03-27-2017, (Subject: ISX Noisy gear train... ) 
Post: #4
RE: ISX Noisy gear train...
Here is the TSB about newer style rocker levers for longer overhead cam life...

https://quickserve.cummins.com/qs3/pubsy...60088.html


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: snailexpress , Squish099 , Vin , Dd614 , scottydogtruck , Hedley , JMBT
03-27-2017, (Subject: ISX Noisy gear train... ) 
Post: #5
RE: ISX Noisy gear train...
TSB that includes a video on checking the fuel pump system to see if it is failing or producing reduced flow/pressure on the 2250 and 2350 engines...

https://quickserve.cummins.com/qs3/pubsy...50104.html


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: snailexpress , Squish099 , Vin , scottydogtruck , Hedley , mikestrucks , JMBT , simon999
03-27-2017, (Subject: ISX Noisy gear train... ) 
Post: #6
RE: ISX Noisy gear train...
Nice! This is my favorite thread!
Goes right along with Rawze's Failure Analysis
Engineering Research.
replyreply
05-12-2017, (Subject: ISX Noisy gear train... ) 
Post: #7
RE: ISX Noisy gear train...
I second that Vin!! Rawze you should re-name this thread...."Fixes for Cummins current Blunders!"


User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!
replyreply
 Thanks given by: Rawze




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.