Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Pin the Motor to replace air compressor

new reply
Pin the Motor to replace air compressor
03-06-2018, (Subject: Pin the Motor to replace air compressor ) 
Post: #1
Waterloo Offline
HMR-Contrinbuting V.I.P.  (4129 Likes)  *****

 		Posts: 4,617
Joined: Oct 2014
Thanks: 5334
Given 4129 thank(s) in 2094 post(s)
Pin the Motor to replace air compressor
When I bar the motor and get the damper lined up with the "Pin" mark, does it matter in regards to TDC to install the compressor? Or, just make sure that I bar to the "pin" mark and disregard TDC like when doing the overhead?
Return to Top | find
replyreply
03-06-2018, (Subject: Pin the Motor to replace air compressor ) 
Post: #2
Rawze Online(Online)
Forum Reject  (14123 Likes)  *******

 		Posts: 11,307
Joined: Jun 2013
Thanks: 5999
Given 14123 thank(s) in 6215 post(s)
RE: Pin the Motor to replace air compressor
just the "pin" position.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: Waterloo , RTRUCKING48
new reply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication