Rpm adjustment |
07-08-2025, (Subject: Rpm adjustment ) Post: #1 | |||
| |||
Rpm adjustment I was wondering if you can adjust the tachometer on a kw t880 it reads 150-200 degree higher than what insite says. Thanks User's Signature: 2010 kenworth t800 isx500hp cm871 13spd 3.55ratio | |||
07-09-2025, (Subject: Rpm adjustment ) Post: #2 | |||
| |||
RE: Rpm adjustment There is no adjustment for them, if its not reading correctly it has a issue with the needle motor/driver. (well... I guess you could try the old move the needle... but I can't recommend... way to easy to really mess it up.) | |||
|
07-10-2025, (Subject: Rpm adjustment ) Post: #3 | |||
| |||
RE: Rpm adjustment Just for fun you can get an rpm reader from Harbor Freight and see what it actually is. I used it for setting up my PTO. Not too much money, I don’t think. https://www.harborfreight.com/digital-ph...66632.html | |||
07-10-2025, (Subject: Rpm adjustment ) Post: #4 | |||
| |||
RE: Rpm adjustment It has two rpm gauge the digital readout and the old needle style. The digital one matches what insite says I just find it annoying that they don’t match lol. Thanks though User's Signature: 2010 kenworth t800 isx500hp cm871 13spd 3.55ratio | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.