SOI Advice
01-24-2017, (Subject: SOI Advice ) 
Post: #1
SOI Advice
Hi all, I'm looking for opinions on SOI increments for an Aussie CM871 E after @m*m^2. I currently have a few on the road set at 4 degrees. A couple of these trucks do a lot of high torque/load work so I just want to know if I should go a little closer to 0 since 4.5 is the recommended max for the bigger injectors.

Cheers.
replyreply
 Thanks given by: overshot


Messages In This Thread
SOI Advice - Signature620 - 01-24-2017
RE: SOI Advice - AussieISX - 01-24-2017,
RE: SOI Advice - Signature620 - 01-24-2017,
RE: SOI Advice - AussieISX - 01-24-2017,
RE: SOI Advice - Rawze - 01-24-2017,
RE: SOI Advice - Unilevers - 01-24-2017,
RE: SOI Advice - AussieISX - 01-24-2017,
RE: SOI Advice - Marajin - 01-25-2017,
RE: SOI Advice - Unilevers - 01-25-2017,
RE: SOI Advice - AussieISX - 01-25-2017,
RE: SOI Advice - kmk - 01-24-2017,
RE: SOI Advice - Signature620 - 01-25-2017,
RE: SOI Advice - Hammerhead - 01-25-2017,
RE: SOI Advice - Running rough - 01-25-2017,
RE: SOI Advice - Marajin - 01-26-2017,
RE: SOI Advice - Running rough - 01-26-2017,
RE: SOI Advice - Marajin - 01-27-2017,
RE: SOI Advice - bazdan902 - 01-26-2017,
RE: SOI Advice - Signature620 - 01-26-2017,
RE: SOI Advice - AussieISX - 01-26-2017,
RE: SOI Advice - Marajin - 01-26-2017,
RE: SOI Advice - Vin - 01-26-2017,
RE: SOI Advice - Rawze - 01-26-2017,
RE: SOI Advice - gearhead - 01-29-2017,
RE: SOI Advice - Brock - 01-29-2017,
RE: SOI Advice - Nilao - 01-29-2017,
RE: SOI Advice - yamajason - 01-29-2017,
RE: SOI Advice - Signature620 - 01-30-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.