CM 870 turbo
01-25-2018, (Subject: CM 870 turbo ) 
Post: #16
RE: CM 870 turbo
(01-25-2018 )tree98 Wrote:  once the valve cover and pan are off is there a way i can flush out some of the oil thats in it to try to get any metal particles out that might have come from the turbo? Also is it reasonable to try to reuse the intercooler or should i not take the chance?

Unfortunately there’s always a chance something can stay clogged inside the CAC end do some harm later .
Would you like playing Russian roulette?
Most likely the pieces of compressor wheel are distributed all the way to the head .
replyreply


Messages In This Thread
CM 870 turbo - tree98 - 01-24-2018,
RE: CM 870 turbo - Hammerhead - 01-24-2018,
RE: CM 870 turbo - tree98 - 01-24-2018,
RE: CM 870 turbo - tree98 - 01-24-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Blake - 01-25-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-25-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-25-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-25-2018
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-26-2018,
RE: CM 870 turbo - tree98 - 01-26-2018,
RE: CM 870 turbo - Wiseman - 01-26-2018,
RE: CM 870 turbo - tree98 - 01-26-2018,
RE: CM 870 turbo - tree98 - 01-26-2018,
RE: CM 870 turbo - tree98 - 01-30-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.