CM 870 turbo
01-26-2018, (Subject: CM 870 turbo ) 
Post: #18
RE: CM 870 turbo
Don’t freak out. Get the after CAC hose off and take a good look inside. Then shine a light inside intake manifold and do the same .
Let us know what you find.
If it’s only dust like aluminum it’s ok . If there’s anything coarse,it’ll need to get cleaned as much as possible.
Run the engine briefly , snapp on accelerator few times to clear before you put the new turbo on . Do I have to mention plugging oil feed line if you do that ? Use of leaf blower or shop air too?
replyreply


Messages In This Thread
CM 870 turbo - tree98 - 01-24-2018,
RE: CM 870 turbo - Hammerhead - 01-24-2018,
RE: CM 870 turbo - tree98 - 01-24-2018,
RE: CM 870 turbo - tree98 - 01-24-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Blake - 01-25-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-25-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-25-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-25-2018,
RE: CM 870 turbo - tree98 - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-25-2018,
RE: CM 870 turbo - Wiseman - 01-26-2018
RE: CM 870 turbo - tree98 - 01-26-2018,
RE: CM 870 turbo - Wiseman - 01-26-2018,
RE: CM 870 turbo - tree98 - 01-26-2018,
RE: CM 870 turbo - tree98 - 01-26-2018,
RE: CM 870 turbo - tree98 - 01-30-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.