Finally bringing Prostar home to fix....

[Brock]

For the 2nd time SOLVED!

https://youtu.be/WhH5a7pgpMk

To the electronic repair store we go! No way I'm paying $2300 CAD for a new ecm for this.

On a side note, Rawze called it back in August lol

[kryten]

The story of "$2.00 to tap with hammer, $9998.00 for knowing where to tap with hammer" comes to mind.

[74bassman]

Was this your problem?? And how did you fix it?

[Waterloo]

I’m going on ten years with my ECM, going to call and see about a new one, before new are no longer available.

[Brock]

It was my problem yes. I brought it to a electronic repair shop that charged $10 to solder it back, they said the resistor was fine.

Waterloo, when I asked only reman were available.

[snailexpress]

(04-30-2018 )Brock Wrote:  It was my problem yes. I brought it to a electronic repair shop that charged $10 to solder it back, they said the resistor was fine.

Waterloo, when I asked only reman were available.

Great job Brock! Imagine how much money stealership will charge for something like you have:anger:

[Waterloo]

(04-30-2018 )Brock Wrote:  It was my problem yes. I brought it to a electronic repair shop that charged $10 to solder it back, they said the resistor was fine.

Waterloo, when I asked only reman were available.

I checked Quickserve the other day, new ones in the pipeline. xxxxxxxNX

[74bassman]

Thanks. Have you run the truck yet?

[Brock]

(05-01-2018 )74bassman Wrote:  Thanks. Have you run the truck yet?

Yeah I drove it all day yesterday doing loads and it was good buy currently I am on the side of the road waiting for my wife to bring me a new ecm.........

Damage must have already been done. Once it got real hot pulling a big hill, it shi#t the bed again.