ISX and Bypass Oil Filter Systems
12-25-2019, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #91
RE: ISX and Bypass Oil Filter Systems
(12-25-2019 )dumptruckisx Wrote:  After reading all 10 pages of this thread i just have a questions. I have a CM2350 and am wondering if anything is different during the install process. I can still tap into the #5 port on the passenger side or is this different for the CM2350?

should be the same as mentioned above.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: dumptruckisx , Toolguy
12-30-2019, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #92
RE: ISX and Bypass Oil Filter Systems
Is port #5 pre-filter oil or already filtered oil?


User's Signature: I have no idea what I’m doing and probably need supervising
replyreply
12-30-2019, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #93
RE: ISX and Bypass Oil Filter Systems
Essentially these ISX blocks haven't changed in years, I would say you are fine.
replyreply
 Thanks given by: dumptruckisx
01-01-2020, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #94
RE: ISX and Bypass Oil Filter Systems
(12-30-2019 )DDlighttruck Wrote:  Is port #5 pre-filter oil or already filtered oil?

if your referring to this post...
http://rawze.com/forums/showthread.php?t...873#pid873

then port#5 is the place to connect the bypass filter. - it is pre-primary oil filter and should not drop the overall oil pressure of the truck.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
01-01-2020, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #95
RE: ISX and Bypass Oil Filter Systems
(01-01-2020 )Rawze Wrote:  
(12-30-2019 )DDlighttruck Wrote:  Is port #5 pre-filter oil or already filtered oil?

if your referring to this post...
http://rawze.com/forums/showthread.php?t...873#pid873

then port#5 is the place to connect the bypass filter. - it is pre-primary oil filter and should not drop the overall oil pressure of the truck.

Yep, that’s the pic I’m referring to

Why wouldn’t you want to use a port that’s after the primary oil filter?

I’m slowly gathering the pieces to build a bypass filter, I’m just reading up on what others have done


User's Signature: I have no idea what I’m doing and probably need supervising
replyreply
01-02-2020, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #96
RE: ISX and Bypass Oil Filter Systems
(01-01-2020 )DDlighttruck Wrote:  
(01-01-2020 )Rawze Wrote:  
(12-30-2019 )DDlighttruck Wrote:  Is port #5 pre-filter oil or already filtered oil?

if your referring to this post...
http://rawze.com/forums/showthread.php?t...873#pid873

then port#5 is the place to connect the bypass filter. - it is pre-primary oil filter and should not drop the overall oil pressure of the truck.

Yep, that’s the pic I’m referring to

Why wouldn’t you want to use a port that’s after the primary oil filter?

I’m slowly gathering the pieces to build a bypass filter, I’m just reading up on what others have done

because your pulling oil away from an already restricted circuit.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: LargeCar
01-02-2020, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #97
RE: ISX and Bypass Oil Filter Systems
(01-02-2020 )Rawze Wrote:  
(01-01-2020 )DDlighttruck Wrote:  
(01-01-2020 )Rawze Wrote:  
(12-30-2019 )DDlighttruck Wrote:  Is port #5 pre-filter oil or already filtered oil?

if your referring to this post...
http://rawze.com/forums/showthread.php?t...873#pid873

then port#5 is the place to connect the bypass filter. - it is pre-primary oil filter and should not drop the overall oil pressure of the truck.

Yep, that’s the pic I’m referring to

Why wouldn’t you want to use a port that’s after the primary oil filter?

I’m slowly gathering the pieces to build a bypass filter, I’m just reading up on what others have done

because your pulling oil away from an already restricted circuit.
Ohh ok, that makes sense


User's Signature: I have no idea what I’m doing and probably need supervising
replyreply
01-03-2020, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #98
RE: ISX and Bypass Oil Filter Systems
   I just installed one on 2018 KW
replyreply
 Thanks given by: Waterloo , LargeCar
01-03-2020, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #99
RE: ISX and Bypass Oil Filter Systems
(01-03-2020 )arch_stanton Wrote:  I just installed one on 2018 KW

you mounted it a bit differently from what i have seen most people make their own J bolts. A close up of what you did there would be nice. how hard was it to get mounted? it looks nice and clean good job by the way!
replyreply
 Thanks given by: Toolguy




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.