My Pete rebuild
04-12-2021, (Subject: My Pete rebuild ) 
Post: #523
RE: My Pete rebuild
Yup, mine sits on 4 pins at the bottom and 4 at the top. Tanks have sleeves that the bushings are inserted into. They for the frame nicely but after a year or so they harden and loose their fit allowing the radiator to slide back against the radiator support framework and rub holes in it. All I did was drill a hole in 2 on the top and 2 on the bottom, then put in rivets to stop the slide from happening. Has worked like a treat so far.
 Thanks given by: Nostalgic , Waterloo

Theme by MyBB Addict
Contact Us | | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication