Oil Temp Gauge Install?
Yesterday, (Subject: Oil Temp Gauge Install? ) 
Post: #10
RE: Oil Temp Gauge Install?
(Yesterday )Drichardson1987 Wrote:  I dont have the insite software to see what the engine is reading. I was just hoping to find a bung in the block that has an oil passage that I can access. I know there are quite a few on the oil cooler, but im not sure if any are before or after the cooler, and where the proper place to monitor would be..

fyi:
aftermarket oil temp sensors are typically installed into the side of the oil pan.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication