Cm870 starts then shuts off,starts back up with a puff off white smoke and stays runn

[Waterloo]

(07-18-2021 )Redland1 Wrote:  Thank you.The biggest issue with the feeler gauges I’m looking at is that they don’t have 0.027 only 0.026 or 0.028.Will those work?

Some variance is allowed, so if that is all you got, yes. Or, just double up two gauges to equal the desired gauge. Like I said, I found the correct feelers in one set at AutoZone off the shelf. But, doubling up is fine, it's a diesel, not a Rolex. And I would remove the gauges from the pack, pull them out of the pack and just use them individually with the zip tie trough the screw hole.