Brass Fitting ID
07-22-2021, (Subject: Brass Fitting ID ) 
Post: #1
Brass Fitting ID
Anybody recognize the markings on this fitting?

This isn't the actual fitting that I need but the roll mark was easier to get a picture of

It's not Parker. I was in their store yesterday and they had no idea

replyreply
07-22-2021, (Subject: Brass Fitting ID ) 
Post: #2
RE: Brass Fitting ID
Looks very close
https://trademark.trademarkia.com/logo-87152246.html
replyreply
 Thanks given by: RocketScott
07-23-2021, (Subject: Brass Fitting ID ) 
Post: #3
RE: Brass Fitting ID
That looks like a newer/ish company

This came off an '89 Peterbilt

Possible that the company isn't around anymore, or was sold to someone else
replyreply
07-23-2021, (Subject: Brass Fitting ID ) 
Post: #4
RE: Brass Fitting ID
What kinda fitting is it? Flare? Compression? Pipe? Shouldnt be oring on a 89.
replyreply
07-23-2021, (Subject: Brass Fitting ID ) 
Post: #5
RE: Brass Fitting ID
The fitting I'm looking for is a test probe port that goes on top of the thermostat housing

1/8' NPT threads with a 1/8" NPT plug in the top to close it off. There's a grommet inside that seals the probe when it's inserted

I can find all sorts of test ports in 1/4" NPT but nothing in 1/8"



For now I just replaced it with a 1/8" male to female fitting with a 1/8 pipe plug in the top to seal it off
replyreply
 Thanks given by: smorgan87





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication