Rawze.com: Rawze's ISX Technical Discussion and more

Just purchased an 06 Volvo with a CM870. Trying to remove the 62 MPH road speed governor with Insite. Insite tells me the ECM has an invalid Footprint and must be recalibrated. Also says it was caused by a previous operation that left the ECM in an Invalid State.
This is the first time I've hooked up to this truck - used to be a "fleet" truck I believe.
Any thoughts? Or can anyone recalibrate this ECM?
Thanks

(01-23-2017 )Vulcantweet Wrote: [ -> ]Just purchased an 06 Volvo with a CM870. Trying to remove the 62 MPH road speed governor with Insite. Insite tells me the ECM has an invalid Footprint and must be recalibrated. Also says it was caused by a previous operation that left the ECM in an Invalid State.
This is the first time I've hooked up to this truck - used to be a "fleet" truck I believe.
Any thoughts? Or can anyone recalibrate this ECM?
Thanks

Unilevers and/or gearhead are both very good with CM870.