+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Cm2350 overhaul questions (/showthread.php?tid=7693)
RE: Cm2350 overhaul questions - Rawze - 09-10-2021
(09-10-2021 )Smiling lemon Wrote:(09-10-2021 )Rawze Wrote: I guess some people just want to tear their equipment up by running the wrong coolant.. or only water?...
That came out of the coolant filter. I have been running the red stuff(peak nitrate free). I might have the mixture off but up front it seem proper(-25 freeze level so it is not a perfect 50/50[or combustion gasses have lowered its effectiveness])
then if the coolant is a pretty bright red and tests ok... and that rusty liquid is what came out of the filter ... the answer will be...
that the damn coolant shut-off valve was not in the open position ... and that filter sat in a dead space for a very long time, not doing anything.
RE: Cm2350 overhaul questions - Smiling lemon - 09-10-2021
It is possible but more likely when I flushed the cooling system it rusted some and filter grabbed a lot of gunk from that and it had also been on there awhile. It is off of my apu lines and I was going to change it as oil change time maintenance for it but it has not reached that time limit and it started leaking.