Cutout test |
08-03-2019, (Subject: Cutout test ) Post: #1 | |||
| |||
Cutout test So I was doing a cutout test today and cylinder #3 was a noticable misfire but it didnt affect the idle quality as much as the rest...my thinking is this injector is on it's way out...will be doing the leakdown test to confirm... | |||
08-03-2019, (Subject: Cutout test ) Post: #2 | |||
| |||
RE: Cutout test make sure you run the overhead valve adjustment before the leak test. Otherwise you may get false readings. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
08-03-2019, (Subject: Cutout test ) Post: #3 | |||
| |||
RE: Cutout test Will do...noticed your Army hat in one of your videos...thank you for your service... B Co. 2/187th Inf. Rakkassan bravo bastards. '86-89' | |||
08-04-2019, (Subject: Cutout test ) Post: #4 | |||
| |||
RE: Cutout test (08-03-2019 )Daytripper Wrote: Will do...noticed your Army hat in one of your videos...thank you for your service... Actually I should be saying "thank you for your service" to you instead .. lol was never inlisted. - it is just a hat. - I am definitely +pro-military though for reasons i will not state publicly. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
08-04-2019, (Subject: Cutout test ) Post: #5 | |||
| |||
RE: Cutout test Before I was inducted in 1972, I wore a Army cap into a bar in Colorado Springs. I had long hair and was obviously not in the military at the time. A soldier came up to me and said "Take that off". I did,,,,,,,, immediately. | |||
08-04-2019, (Subject: Cutout test ) Post: #6 | |||
| |||
RE: Cutout test | |||
08-04-2019, (Subject: Cutout test ) Post: #7 | |||
| |||
RE: Cutout test Whole lot of Army there at Fort Carson. Check it out. It’s all good. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.