Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / CM870 Pull File from ECM

new reply
CM870 Pull File from ECM
02-19-2023, (Subject: CM870 Pull File from ECM ) 
Post: #10
Peashooter67 Offline
Established  (26 Likes)  **

 		Posts: 106
Joined: Nov 2018
Thanks: 7
Given 26 thank(s) in 20 post(s)
RE: CM870 Pull File from ECM
That’s for the cm871 not a cm870 ! Will this still work?

User's Signature: Have you checked your muffler bearings today?
Return to Top | find
replyreply
02-20-2023, (Subject: CM870 Pull File from ECM ) 
Post: #11
Contributing V.I.P.tree98 Offline
Contributing V.I.P.  (1776 Likes)  ****

 		Posts: 3,020
Joined: May 2016
Thanks: 1025
Given 1776 thank(s) in 1123 post(s)
RE: CM870 Pull File from ECM
Yes it will work for pulling a copy of the file out of an 870 for review/examination purposes. But putting a changed file back into an 870 via CT is a no-no that can brick the ecm.
Return to Top | find
replyreply
 Thanks given by: trucklogger2
02-20-2023, (Subject: CM870 Pull File from ECM ) 
Post: #12
Peashooter67 Offline
Established  (26 Likes)  **

 		Posts: 106
Joined: Nov 2018
Thanks: 7
Given 26 thank(s) in 20 post(s)
RE: CM870 Pull File from ECM
That’s What I thought.

User's Signature: Have you checked your muffler bearings today?
Return to Top | find
replyreply
new reply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication