07 Intl 9400i with CM 870

[Coronati]

I have a 07 International 9400i with a CM 870. Motor has just been rebuilt (out of frame), we had to change out the block. Old block had a horizontal 8 inch crack running thru the cooling jacket on #5 cylinder. This engine has been De-mandated ever since I got this truck last year in August. I need some help getting the ECM dialed in to run right with this modification. Who would be the right person to get in touch with for the proper information. Thanks.

[Rawze]

For a CM870 specifically, that would be gearhead and/or Unilevers.

[03maxpower]

I don't think they frequent here much though. I pm'd both of them a few days ago and neither answered yet???

[Coronati]

Yep did the same today.

[big_roy]

(05-07-2017 )03maxpower Wrote:  I don't think they frequent here much though. I pm'd both of them a few days ago and neither answered yet???

Be patient, is my advice. I'm sure they're busy in the real world.

[03maxpower]

I don't have a problem with that. I was just stating my experience at the moment.

[big_roy]

(05-07-2017 )03maxpower Wrote:  I don't have a problem with that. I was just stating my experience at the moment.

Same here.

[Rawze]

Mr. Hag down in atlanta does CM870. He uses unilevers and/or gearhead as the programmers, Just a thought.