SOHC ISX overhead

[Liquidforce]

Hi Guys,

I've watched rawze (and others) running an overhead on the earlier DOHC ISX, but wondering if there was a similar video out for running it on a later model SOHC? (Cm2250/2350)

Cheers

[Hammerhead]

(03-06-2017 )Liquidforce Wrote:  Hi Guys,

I've watched rawze (and others) running an overhead on the earlier DOHC ISX, but wondering if there was a similar video out for running it on a later model SOHC? (Cm2250/2350)

Cheers

No difference. The 2250, 2350, and Rawze's instructional video of an 871...it's all the same, other than that you don't have to adjust the injector preload on a single cam.
So simply ignore the injector part, and follow the valve cam portion of the procedure.

[Signature620]

And instead of removing the oil filler to bar it over, you just pop out the rubber plug in the gear cover.

[Hammerhead]

(03-06-2017 )Signature620 Wrote:  And instead of removing the oil filler to bar it over, you just pop out the rubber plug in the gear cover.

Thanks, I keep forgetting to tell people that difference...