| Metering actuator question... |
| 10-18-2019, (Subject: Metering actuator question... ) Post: #10 | |||
| |||
| RE: Metering actuator question... That is what I was thinking, and hoping. Thank you! | |||
| 10-18-2019, (Subject: Metering actuator question... ) Post: #11 | |||
| |||
| RE: Metering actuator question... I have seen plenty of trucks with those little plastic caps completely missing, trucks ran just fine. Like others have said though, just make sure that fuel is not leaking in the solenoid to have caused it to pop off there. None of the solenoids should be getting wet with fuel. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| 10-18-2019, (Subject: Metering actuator question... ) Post: #12 | |||
| |||
| RE: Metering actuator question... Will do, I'll dab some silicone on there. The little drop of moisture I saw may have been just that, moisture. All dry around the four actuators. | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.