| I have a question about doing the bottom end. |
| 02-16-2024, (Subject: I have a question about doing the bottom end. ) Post: #1 | |||
| |||
| I have a question about doing the bottom end. What is the best oil pump besides Cummins on the market? I know I can do oem but checking for rod bearings and main bearings since I just hit the 1 million mark on my 2015 kw t680. I wanted to get here and did now I wanna do a new oil pump and the bottom end. Thanks everyone | |||
| 02-16-2024, (Subject: I have a question about doing the bottom end. ) Post: #2 | |||
| |||
| RE: I have a question about doing the bottom end. OEM only on internal parts. That is the only answer you will get from the reputable people here. That is one place you don't want to skimp. Something non-critical like a tensioner, belt, etc I would go with aftermaket. | |||
|
| 02-16-2024, (Subject: I have a question about doing the bottom end. ) Post: #3 | |||
| |||
| RE: I have a question about doing the bottom end. Rawze will have a fun answering this :-) Stop trying to save a nickel to spend a dollar later. Replace oil pump OEM and Shim Correctly and make sure to double check of size bearing or mismatch. | |||
|
| 02-16-2024, (Subject: I have a question about doing the bottom end. ) Post: #4 | |||
| |||
RE: I have a question about doing the bottom end. (02-16-2024 )Pd6cas2 Wrote: Rawze will have a fun answering this :-) I could not have said it better myself..lol User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.