Series 60 Trip report view |
12-11-2016, (Subject: Series 60 Trip report view ) Post: #9 | |||
| |||
RE: Series 60 Trip report view (12-10-2016 )scottydogtruck Wrote: 2903rpm....is your motor still running? should be in pieces at that rpm... Detroits will handle a lot of rpm. The entire reciprocating assembly is very light weight and the stroke is relatively short. My friend Herb is a S60 loon and has a hot rodded Detroit and pulls hills at 32-3300rpm. Some place in CA did the ecm with mapping to 3600rpm. It won't be far behind my Cat up a mountain but will be turning more than twice the rpm. His is not a reliable setup, hydro locked once and had a runaway turbo on the 301 in FL. Been torn apart 3 times in last two years. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Series 60 Trip report view - Jarhead79 - 12-08-2016, RE: Series 60 Trip report view - Jarhead79 - 12-08-2016, RE: Series 60 Trip report view - Rawze - 12-08-2016, RE: Series 60 Trip report view - Jarhead79 - 12-08-2016, RE: Series 60 Trip report view - snailexpress - 12-09-2016, RE: Series 60 Trip report view - Jarhead79 - 12-10-2016, RE: Series 60 Trip report view - scottydogtruck - 12-10-2016, RE: Series 60 Trip report view - Jarhead79 - 12-10-2016, RE: Series 60 Trip report view - Texasdude74 - 12-11-2016 RE: Series 60 Trip report view - Jarhead79 - 12-11-2016, RE: Series 60 Trip report view - Texasdude74 - 12-11-2016, RE: Series 60 Trip report view - Jarhead79 - 12-12-2016, RE: Series 60 Trip report view - Jarhead79 - 12-11-2016, RE: Series 60 Trip report view - Unilevers - 12-12-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.