ISX and Bypass Oil Filter Systems |
05-11-2016, (Subject: ISX and Bypass Oil Filter Systems ) Post: #34 | |||
| |||
RE: ISX and Bypass Oil Filter Systems (05-09-2016 )Rawze Wrote: That sucks, Perhaps a picture and a lesson in what NOT to do? Sorry fellas, i have no pics. As for what not to do, i won't attempt to use a aluminum fitting again. I think is was a defective fitting. Why? Well, the fitting never seemed to snug up or get tight. According to what i have been reading the torque on this fitting should be 45 NM. Of course i wasn't using a torque wrench, as it didn't seem to get that tight. But, i would advise others to use a torque wrench. At least to know that you are not over torquing and causing any other unseen damage to the threads. In the future I will try to get some pics, when I am working on things. The pics i have seen on here have been very helpful. Thanks for having this forum, Rawze.:heart: | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.