ISX 15 NOT TURNING OVER AFTER EGR TUNEUP

[Waterloo]

(10-12-2020 )kellyedrew Wrote:  

(10-12-2020 )Signature620 Wrote:  Early CM2250 going by engine number. Do you have Insite?

I don’t have any computer equipment.

If you are going to own that truck you will need an Inline 6 reader and the Cummins Insite software, most of us purchase ours on eBay, here is a link to one that I use... https://www.ebay.com/itm/Cummins-INLINE-...SwIJlZ9U~7

You will need that, and go to Cummins Quickserve and open a free account, here is the link, you will need the Engine Serial Number to register, the ESN number. https://quickserve.cummins.com/info/index.html

You will need a laptop, I use my MacBook Air, or you can use any model/brand PC that runs Windows 7 or Windows 10 with at least one USB output. You do not need anything fancy, nor a lot of memory or hard drive space. Many purchase an inexpensive laptop, a refurbished one or find one on sale at say Walmart. Load up the software for the truck and leave it alone, this computer is for diagnostic purposes only. The first time you use it the entire setup will have already paid for itself. I will pm you some instructions.