ProStar Sleeper Suspension Modification...

[Paccardude]

Hi all,

I ordered my pro-ride xt sleeper suspension. I removed the original airbags. They were filled with air but now there is no air coming out of the 1/4" air lines running into the bags. I've checked for leaks with some dawn dish soap and water. There is only a small leak out of the air dryer assembly, it's where there is a hole that you can put your finger into.
This had already been happening with the old air bags.
I tried the air compressor, no leaks. I noticed there's only one governor running out the back of the compressor and the side one is blocked off.
I'm not sure where I to start. I got a new air dryer filter. I haven't installed it yet. I was wondering if I should remove the old filter first and WD40 the air lines?
Please advise