ProStar Sleeper Suspension Modification...

[Rawze]

(06-17-2021 )Paccardude Wrote:  Rookie mistake. I was tightening up the nut on the bolt that hangs down from the cab, and the bolt was knocked loose. There is no way to access the head from the cab to continue tightening the nut down. Do I need to get the bolt welded back on to the frame?

- pull the flooring inside the cab up above where the bolt is... drill a large enough hole for a socket, get to the top of the bolt... replace the hole with a plastic or rubber plug after and some sealant when done?

(just some thoughts on what I would likely have done).