Series 60 Trip report view
12-11-2016, (Subject: Series 60 Trip report view ) 
Post: #11
RE: Series 60 Trip report view
(12-11-2016 )Texasdude74 Wrote:  
(12-10-2016 )scottydogtruck Wrote:  2903rpm....is your motor still running? should be in pieces at that rpm...

Detroits will handle a lot of rpm. The entire reciprocating assembly is very light weight and the stroke is relatively short. My friend Herb is a S60 loon and has a hot rodded Detroit and pulls hills at 32-3300rpm. Some place in CA did the ecm with mapping to 3600rpm. It won't be far behind my Cat up a mountain but will be turning more than twice the rpm. His is not a reliable setup, hydro locked once and had a runaway turbo on the 301 in FL. Been torn apart 3 times in last two years.

I know of a guy in Nebraska that makes reliable 725hp DDEC 4 12.7 series 60 engines. And 2350 torque. He has guys drive them in his trucks. All OE parts.
replyreply


Messages In This Thread
RE: Series 60 Trip report view - Jarhead79 - 12-11-2016
RE: Series 60 Trip report view - Unilevers - 12-12-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.