Series 60 Trip report view
12-12-2016, (Subject: Series 60 Trip report view ) 
Post: #14
RE: Series 60 Trip report view
(12-11-2016 )Texasdude74 Wrote:  
(12-11-2016 )Jarhead79 Wrote:  
(12-11-2016 )Texasdude74 Wrote:  
(12-10-2016 )scottydogtruck Wrote:  2903rpm....is your motor still running? should be in pieces at that rpm...

Detroits will handle a lot of rpm. The entire reciprocating assembly is very light weight and the stroke is relatively short. My friend Herb is a S60 loon and has a hot rodded Detroit and pulls hills at 32-3300rpm. Some place in CA did the ecm with mapping to 3600rpm. It won't be far behind my Cat up a mountain but will be turning more than twice the rpm. His is not a reliable setup, hydro locked once and had a runaway turbo on the 301 in FL. Been torn apart 3 times in last two years.



I know of a guy in Nebraska that makes reliable 725hp DDEC 4 12.7 series 60 engines. And 2350 torque. He has guys drive them in his trucks. All OE parts.

How high is he spinning them?
I don't believe any 12+ liter Diesel engine will last long if it regularly sees 2k rpm. 3k rpm is on borrowed time.


I'm not sure high high rpm but fought it's 3000 rpm that sounds like a sled pull engine being used in a working truck. I wish I had your buddys money. Or tell me where to apply.
replyreply


Messages In This Thread
RE: Series 60 Trip report view - Jarhead79 - 12-12-2016
RE: Series 60 Trip report view - Unilevers - 12-12-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.