Owners manual

[snailexpress]

Good question because Volvo is special animal.
First special things U-joints are not greaseble. Same about drive shaft splins.
Do not use moly grease on slack adjusters. When greasing S-cam put piece of cardboard inside the drum under s-cam to prevent grease on brake.
King pins must be greased top and bottom.
All points from driver front side -
1Front spring pin left and right
2 Drag link front
3 King pin (top and bottom) left and right
4Steering shaft U-joint
5Drag link rear
6Toe rod left and right
7Rear sprig pin left and right
8 Rear spring hanger pin left and right
9Throw bearing
10 Slack adjusters
11 S-cam brackets
12 Fifth wheel
Some information about Volvo you can find here https://volvotrucks.vg-emedia.com/