squeaky belts |
05-25-2023, (Subject: squeaky belts ) Post: #3 | |||
| |||
RE: squeaky belts (05-25-2023 )Rawze Wrote: Many times, squealing belts are also caused by polished pulleys much of the time. After removing the belt, rough the pulleys up with a wire brush to remove buildup in the groves and to remove any polishing. I know of one guy who claimed he could not get his to stop squealing no matter what... New belts, new tensioner, he roughed up the pulleys with a wire brush,.. he eventually resorted to painting his pulleys with a bit of muriatic acid into all the grooves and letting it sit on them for an hour or so, washed it off with plain water, then wire brush again, -- After that, no more squeal.Thanks Rawze and you're right the pulleys are quite polished so I will try your suggestions | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
squeaky belts - Josiah Harder - 05-24-2023, RE: squeaky belts - Rawze - 05-25-2023, RE: squeaky belts - Josiah Harder - 05-25-2023 RE: squeaky belts - Mrkentee - 05-27-2023, RE: squeaky belts - Dorito - 07-28-2023, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.