Threaded Mode | Linear Mode

JMBT · 03-22-2020, **(Subject: engine assembly lube )**

It looks like amazons wait time on permatex 81950 (engine assembly lube) is too long, what other engine assembly lube do you guys use?? Lubriplate 105 also has a long wait time, but I can get Sta-Lube 3331 xtreme on two day prime...? Any experience with the Sta-Lube??

tree98 · 03-22-2020, **(Subject: engine assembly lube )**

Walmart.com has ultra slick for 5.99 and free shipping, Says I could have it between Wednesday and Monday.

JMBT · 03-22-2020, **(Subject: engine assembly lube )**

Thanks Tree98, I was looking on amazon, $5.99 also but delivery was into April! I had totally forgotten about Walmart.com. I’ll check it out.

Lonestar10 · 03-22-2020, **(Subject: engine assembly lube )**

also could check your local auto parts stores might pay a bit more but its already there.

Pd6cas2 · 03-23-2020, **(Subject: engine assembly lube )**

I’ve seen ultra slick at Freightliner Converse, Tx !
Hopefully Your close by.

redbeard · 03-23-2020, **(Subject: engine assembly lube )**

Stp oil treatment was my standard for years, never an issue

Chamberpains · 03-23-2020, **(Subject: engine assembly lube )**

I've seen permatex engine lube at autozone, napa and all other big chain stores. They are still open in most shutdown states.

Waterloo · 03-23-2020, **(Subject: engine assembly lube )**

Check the auto parts store, I think we found it at Auto Zone, Slick Lube. Works like a champ, nice and sticky, made installing the lower end bearings a breeze.

Rawze · 03-23-2020, **(Subject: engine assembly lube )**

ultra-slick assy. lube is typically my first choice. It is at a lot of places.

Vasoline petrolium jelly is also not a bad choice. I sometimes use this, especially if the engine is going to sit a while before being cranked that first time. I will not however use it in really hot (90+F) weather.