Threaded Mode | Linear Mode

tree98 · 05-01-2018, **(Subject: Owners manual )**

probably won't find any grease zerks on your motor. As for your Volvo chassis, contact a dealer about an owners manual, but you can start by getting under your front end, look at all your steering components, anywhere there is a connection there will be a grease fitting. Don't grease them until the rubber boots explode!! just a few pumps and you should see the boot inflate a little, STOP there!! You'll have a grease fitting on your throw out bearing if you have a manual trans. that one could be tricky to find if you've never greased a truck before. each U-joint will have one, don't grease those to death either. each S-cam tube and slack adjuster will have a fitting. You can definitely overgrease things and cause damage so take it easy.