2015 T660 hood clearance

[Mattman]

My hood is striking the cab when you hit a dip in the road or say jumping up on a bridge or falling of the other side of a bridge.

Have adjusted the hood seats up about as far as they will go I think. Will still hit each other sometimes. Replaced cab shocks, cab sits level so I don't think it is because of the cab air bags making the cab ride high. Side note T660 cab shocks are a pain to change. Most trucks have shocks on back of cab. But no Kenworth thought it a good idea to put them up under the sleeper, and to make it even better the bolts holding the shocks on are in backwards. The bolt hits the air bag before you can get the bolt out of the shock. You can bet I put the bolt in from the other direction when I changed the shocks.

Just from looking at other trucks like mine some show signs of the hood smacking the cab and some don't so??
Anyone know what I need to do to stop this from happening?

I have about an inch gap between the hood and cab when sitting.