2015 T660 hood clearance
04-05-2020, (Subject: 2015 T660 hood clearance ) 
Post: #5
RE: 2015 T660 hood clearance
Replaced drivers side cab mount. Not fun at all. The one I took out didn't look too be worn much. Tried to do passenger side but gave up when I saw that the coolant hoses for heater cores was not going to stretch. Cab has to be raised at least 2.5" to get mounts out.

Replaced my hood pin bumpers and adjusted them. Hopefully this will stop the hood from smacking the cab.

Picture of what cab mount looks like. Kenworth isn't easy to work on.


Attached File(s)Thumbnail(s)
   


User's Signature: 2015 Kenworth T660
replyreply
 Thanks given by: Rawze


Messages In This Thread
RE: 2015 T660 hood clearance - Mattman - 04-05-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.