Component 138
09-21-2021, (Subject: Component 138 ) 
Post: #5
RE: Component 138
(09-20-2021 )Rawze Wrote:  When is the last time you re-torqued all the hub bearings and put them back into spec? .. it is suposed to be done every 250k miles... The most common cause of ABS alarms and/or blown wheel seals are due to neglect of re-torquing all the hub bearings at regular intervals.

Ill check that, truck has about 280k miles. If it is a sensor i would expect it would only illuminate the abs light instead of esp and traction control. This is first time i had an issue with a truck that has a esp/yaw rate sensor...maybe they throw codes differently
replyreply


Messages In This Thread
Component 138 - eggtrucks - 09-20-2021,
RE: Component 138 - tree98 - 09-20-2021,
RE: Component 138 - eggtrucks - 09-20-2021,
RE: Component 138 - Rawze - 09-20-2021,
RE: Component 138 - eggtrucks - 09-21-2021
RE: Component 138 - Rawze - 09-21-2021,
RE: Component 138 - eggtrucks - 09-22-2021,
RE: Component 138 - Rawze - 09-23-2021,
RE: Component 138 - eggtrucks - 09-30-2021,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.