| Front crank seal |
| 02-13-2017, (Subject: Front crank seal ) Post: #1 | |||
| |||
| Front crank seal I have a cm2250, what specialty tools would I need to replace this seal? Also what parts would I also need besides the seal? I've done them on series 60s and I thought they were a fairly easy to do. | |||
| 02-13-2017, (Subject: Front crank seal ) Post: #2 | |||
| |||
RE: Front crank seal (02-13-2017 )joed2323 Wrote: I have a cm2250, what specialty tools would I need to replace this seal? Also what parts would I also need besides the seal?cummins quickserve best place to find answers. It's free just register engine serial # | |||
|
| 02-13-2017, (Subject: Front crank seal ) Post: #3 | |||
| |||
| RE: Front crank seal My mechanic says they are very easy to screw up which is why he always has a spare. User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit. | |||
|
| 02-13-2017, (Subject: Front crank seal ) Post: #4 | |||
| |||
RE: Front crank seal (02-13-2017 )joed2323 Wrote: I have a cm2250, what specialty tools would I need to replace this seal? Also what parts would I also need besides the seal? You need tool part #3162992 Front Crank Seal Remover/Installer to do this procedure with the best chance of success. The procedure is in Quickserve->ISX Service Manual->Section 1 Cylinder Block->10-001-023 Crankshaft Seal, Front User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.