Prostar ac
06-26-2018, (Subject: Prostar ac ) 
Post: #64
RE: Prostar ac
Im looking on Amazon and there is 100s of sellers on there selling pro micro. Which one do i want?
replyreply
06-26-2018, (Subject: Prostar ac ) 
Post: #65
RE: Prostar ac
Any that's 100% compatible with arduinio. If your a poor solderer I think I would get one with the post preinstalled and a solderless breadboard. Then it will just about all be plug and play. But the proper way for long term reliability is soldering the components in place.
replyreply
 Thanks given by: 74bassman
06-27-2018, (Subject: Prostar ac ) 
Post: #66
RE: Prostar ac
I updated the post to include the parts that I used.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: DosGatos , 74bassman
06-27-2018, (Subject: Prostar ac ) 
Post: #67
RE: Prostar ac
thank you Rawze. I will be ordering the parts tonight. Rawze i saw in one of your post that the Blend door actuator is the as a Jeep Cherokee, is this the same for all the actuators? I have my passenger seat out, and access to the blower motor ect. I am going to replace all while this is apart.
replyreply
06-27-2018, (Subject: Prostar ac ) 
Post: #68
RE: Prostar ac
parts are order. Thanks Rawze. To hot in Oklahoma to playing around with this AC.
replyreply
08-29-2018, (Subject: Prostar ac ) 
Post: #69
RE: Prostar ac
Hi everyone,

First of all, I want to thank you Rawze for all your work. I added some lines to display all these values in an I2C LCD display (4x20). I think its a great troubleshooting tool when you are on the go and cant hook up your gauges. It displays your System PSI, Evaporator temp, fan status, and compressor status.


You only have to add 4 more cables to this screen and add this library (LiquidCrystal_I2C-1.1.2):
GND> to your ground
VCC> to your 5vdc supply
SDA> to pin 2
SCL> to pin 3

Parts needed:
https://amzn.to/2GT5eJr


Attached File(s)Thumbnail(s)
   

.txt  Sketch.txt (Size: 13.14 KB / Downloads: 1)
.zip  LiquidCrystal_I2C-1.1.2.zip (Size: 19.38 KB / Downloads: 0)
replyreply
 Thanks given by: Rawze , Sergiu
08-29-2018, (Subject: Prostar ac ) 
Post: #70
RE: Prostar ac
lol, nice.

I have LCD screens on a few different Arduino devices I have made too. Thats the beauty of them.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
08-30-2018, (Subject: Prostar ac ) 
Post: #71
RE: Prostar ac
Yes sir, I love those I2C LCDs.

Once my brother comes back from his trip, we will start installing it. Because of this, I haven't seen where those two A77B wires come from. I do not know if you meant to type A77B and A77 or I have the wrong schematic. According to this schematic A77B comes from J1 and A77 from J3.


Attached File(s)Image(s)
./uploads/201808/post_633_1535664765_ed6d0e1cf2e2f9d3f26abd1aeca20984.png
replyreply
08-30-2018, (Subject: Prostar ac ) 
Post: #72
RE: Prostar ac
(08-30-2018 )INTERPRO Wrote:  Yes sir, I love those I2C LCDs.

Once my brother comes back from his trip, we will start installing it. Because of this, I haven't seen where those two A77B wires come from. I do not know if you meant to type A77B and A77 or I have the wrong schematic. According to this schematic A77B comes from J1 and A77 from J3.

The AC compressor on/off is wire A77
The feedback for the high pressure sensors is A77B

Both get cut away from the controller and wired to the arduino circuit instead.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Sergiu , ktblogistics




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.