ProStar Sleeper Suspension Modification... |
02-10-2017, (Subject: ProStar Sleeper Suspension Modification... ) Post: #28 | |||
| |||
RE: ProStar Sleeper Suspension Modification... (02-10-2017 )Rawze Wrote:Sorry, I'm referring to the OEM ones.(02-10-2017 )Brock Wrote: A frienks of mine replaced his twice in 1 year. Just junk. User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit. | |||
02-10-2017, (Subject: ProStar Sleeper Suspension Modification... ) Post: #29 | |||
| |||
RE: ProStar Sleeper Suspension Modification... (02-10-2017 )Brock Wrote: Sorry, I'm referring to the OEM ones. Was wondering. I had one person who did have a pro-ride system where the drivers side mount weld broke. They sent him a new updated one right away free of charge. Other than that, I haven't heard anything bad from it so far. The one I installed on my own truck seems to be holding up just fine since last april. Hopefully I will not have any issues with it. It has already out-lasted the OEM system and still going strong. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
02-16-2017, (Subject: ProStar Sleeper Suspension Modification... ) Post: #30 | |||
| |||
RE: ProStar Sleeper Suspension Modification... Got it installed. Looks good, feels good inside the cab for the little driving I did but my shocks were screwed so I wouldn't be able to tell if they were better than factory. User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit. | |||
|
02-16-2017, (Subject: ProStar Sleeper Suspension Modification... ) Post: #31 | |||
| |||
RE: ProStar Sleeper Suspension Modification... That red wire running across the back is exposed wiring. A D.O.T. violation. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
02-16-2017, (Subject: ProStar Sleeper Suspension Modification... ) Post: #32 | |||
| |||
RE: ProStar Sleeper Suspension Modification... Lol I knew you would catch that! That was a quick 2 minute -40c patch to give my driver work light. It's now fixed after this pic was taken. User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit. | |||
|
09-07-2018, (Subject: ProStar Sleeper Suspension Modification... ) Post: #33 | |||
| |||
RE: ProStar Sleeper Suspension Modification... Anybody have a Parr number for these airbags on the proride system. Mine just got a pin hole and is leaking. I know I should have wrote down the number before installing.... | |||
09-07-2018, (Subject: ProStar Sleeper Suspension Modification... ) Post: #34 | |||
| |||
RE: ProStar Sleeper Suspension Modification... http://rawze.com/forums/showthread.php?tid=2114 see post #9 Airbag: Firestone WO2358 7093 Shock: Gabriel 83009 These numbers came on a paper included with my Pro-ride. My Pro-ride is about a year old and I just had to replace a bag too. I didn't know where I put the part numbers, but just used my phone to read this post. Love Rawze's website. | |||
09-21-2018, (Subject: ProStar Sleeper Suspension Modification... ) Post: #35 | |||
| |||
RE: ProStar Sleeper Suspension Modification... Proride just updated their product, it comes now with 4 air-bags instead of 2, they said it will last longer. New price 750 plus shipping. I just ordered one anyway, it's cheaper than changing OEM bags every year. | |||
|
11-01-2020, (Subject: ProStar Sleeper Suspension Modification... ) Post: #36 | |||
| |||
RE: ProStar Sleeper Suspension Modification... (02-10-2017 )Rawze Wrote: Not trying to advertise for them, I am usually the one who be quick to point out most non-oem products for inferior quality, etc. but proride cab suspension is the way to go on a prostar instead of putting factory replacement bags back on it. imk going to be looking in the spring for this thanks RAWZ User's Signature: Just my 2 cents + - | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.